Port Talbot and Neath
Those two towns are the main service areas. Baglan, Briton Ferry, Margam and the smaller valley towns use the same Llandow workshop.
Port Talbot, Neath and the nearby towns are covered from our one workshop at Llandow, east along the M4.
Neath Port Talbot is covered from our workshop at Llandow, including Port Talbot, Neath, Baglan, Briton Ferry and Margam. The usual drive is east on the M4, then south towards Cowbridge. There is no branch in Port Talbot or Neath.
All bookings are completed at our Llandow workshop. Start with the exact car and the result you want, and we will explain the most suitable route before any work is agreed.
Check tuning options for your vehicleThis county page covers Port Talbot, Neath and the smaller towns around them. Every appointment is at Llandow. Use the town pages for Port Talbot and Neath, then book the car into the Vale workshop.
Those two towns are the main service areas. Baglan, Briton Ferry, Margam and the smaller valley towns use the same Llandow workshop.
Unit 11 Sambucus Avenue, Llandow Trading Estate, Cowbridge, CF71 7PB. That is the only place the work is carried out.
Stage 1, Stage 1+ and Stage 2 prices are starting prices. The quote follows the exact ECU and the condition of the car.
These are common enquiry routes for local drivers. Every vehicle is assessed at our Llandow workshop before a diagnosis, repair or specialist service is recommended.
AdBlue warnings, no-start countdowns and SCR codes can start with a free code scan and printout before the appropriate diagnostic or repair route is agreed.
Explore the service Free initial code scan availableDPF restrictions, regeneration concerns and fault codes can be assessed before DPF cleaning, diagnostics or specialist DPF-delete work for suitable use cases.
Explore the service Free initial code scan availableEGR warning lights, flow codes, limp mode and poor running can be assessed before repair or any further specialist work is recommended.
Explore the service Free initial code scan availableBring in DPF warning lights, pressure faults or repeated regeneration concerns for a fault-code scan and clear next-step advice.
Explore the service Free initial code scan availableWe can assess SCR warnings, AdBlue countdowns and stored fault codes before deciding on the appropriate diagnostic or repair route.
Explore the service Free initial code scan availableUse the free initial code scan and printout to begin fault-finding for EGR, DPF or related engine-management warning lights.
Explore the serviceUse these guides to understand the options, then check the exact vehicle before choosing a stage or service.
See how vehicle-specific calibration is developed around diagnostics, data and the way you use the car.
Read the guide Llandow workshop guideUnderstand Stage 1 remapping and how we decide whether it suits a particular petrol or diesel vehicle.
Read the guide Llandow workshop guideTransmission software and shift-behaviour changes for supported vehicles and applications.
Read the guide Llandow workshop guideMeasured testing, fault investigation and development work for your car in our Llandow dyno cells.
Read the guide Llandow workshop guideStart with the warning lights, restriction fault or diagnostic results. We can discuss DPF cleaning, diagnostics and specialist DPF-delete enquiries for suitable use cases.
Read the guide Llandow workshop guideVisit Llandow for a free initial assessment, fault-code scan and printout, then decide whether advanced diagnostics or repair work is required.
Read the guideCustom remapping, developed in house and matched to your car. Choose a stage to compare suitability, gains and pricing.
For healthy standard cars
For suitable standard cars
For cars with supporting hardware
Prices shown are starting prices. Some ECUs and vehicle combinations cost more. Check your car for a vehicle-specific quote.
The work is supported by real workshop capability, not a remote file-download service.
More than two decades of vehicle calibration, diagnostics and workshop experience.
Advice is based on the vehicle, its condition and the customer's goal, supported by our own calibration data.
We develop and test our own tuning work instead of reselling downloaded files.
On-site dyno cells, data logging and specialist diagnostic equipment support the work.
Find your make and model to see the available tuning data, or contact the workshop for a recommendation.
Practical information about the workshop, booking and what happens before tuning.
No. Neath Port Talbot is a service area. All remapping, diagnostics and dyno work happen at Llandow in the Vale of Glamorgan.
Port Talbot and Neath are the main towns, with Baglan, Briton Ferry, Margam and the surrounding communities using the same workshop.
Travel east, then south towards Cowbridge and Llandow. Use current directions to CF71 7PB rather than a fixed journey time.
The registration, any warning lights, modifications and what you want from the car. That decides whether the visit starts with diagnostics or a remap.
Tell us what you drive and what you want to improve. We will advise on the next useful step.